Radiators are a type of heat exchanger. Fluid in the gas phase flows in its primary circuit and the heater or cooler fluid flows in the secondary circuit.
Accumulation Tanks are used with plate heat exchangers to get utility water in community life areas such as, buildings, hotels, dorms and public administration.
Usege Area: Apartment, Single Houses, Hospitals, Dorms, Sport Centers, Factories, Public Buildings, shortly in every place where hot water is required, accumulation tanks are used.
With the widespread use of natural gas use in the rapidly growing expansion tanks in Turkey, which debuted in the early 1990s our country.
Today, at least one expansion tank is used in each boiler room. Expansion tanks have become a standard part of both the heating system and the booster installation.
Ekin Endüstriyel serves food, chemical,residental and hotel sectors with producing stainless stain tanks which are designed by our Professional engineers.
Stainless stain tanks are usually used in food, industrial plants and hotels for potable water. Stainless stain tanks must be designed according to required specifications before producing.
It provides savings through thermal balance by mixing hot water coming out from the boiler and cold water coming out from the installation. It prevents thermal stress.
Due to the condensation that occurs during combustion and the condensation of the flue gases, pH values decrease, and condensate acid appears.
Air tank is one of the main products that compensate for pressure fluctuations that may occur at the compressor outlet.
MIT Apartment and Local Heating Network Transfer Stations, combines the economy provided by central heating systems with the advantage of determining independently comfort conditions offered by individual systems.
Thus, this system which significantly reduces energy consuptions, helps also to provide an individual sharing in central system fuel consumptions.
MIT Solenoid Dosing Pumps, acid, chlorine, liquid manure etc. Designed to be used in place that should be given in doses of chemicals are precision dosing device. (pool, drinking water, agricultural irrigation )
Areas of usage: Swimming Pools, chemical fluid transfer, Car Wash Fluids, Cooling Towers, Reverse Osmosis (RO) Systems, Original Equipment Manufacturers, Capacity values were obtained as a result of tests made under standard conditions with water.
The type of pump used to transfer Acidic, basic, corrosive, aggressive, alkaline, flammable and inflammable fluids such as liquid soap, honey, chocolate, molasses, cream, jelly, paste, glue, jam, shampoo, paint etc. fluids by immersing them from the closed containers into the pipe of the pump.
The pump motor is outside the fluid. The discharge of the fan at the end of the pipe at the end of the pipe with the engine drive starts.
Mono pumps are used in various industries, in most tough applications, without any problem, it can transfer fluids.
As it is suitable for transferring high and low viscosity fluids it can also transfer abrasive, sticky, crush and foam sensitive fluids. It provides a measurable, smooth, linear flow with quiet and vibration-free operation.
Blowers are installation equipment that provides the transfer of air in the emitted environment at high or low pressure and rotates the fan with the force received from the motor.
Blower is a plumbing equipment that rotates the fan with the force it receives from the engine, which transfers the air in the emitted environment at high flow or low pressure. The fan in the blowers rotates and vacuum the air in the suction section. The trapped air is then pushed into the outlet side. Blowers are often used to move air. MIT brand blowers offer the most reliable service for your application areas in terms of size, performance and technology.
HG series blower is a positive displacement type of machine used to convey air and gas and is widely used in almost every industry, we has earned a high reputation in pressure and vacuum area by HG series three lobe roots blower for it’s high efficiency and energy saving.